Temperature & Humidity Chambers
Environmental Reliability Testing
Simulates high and low temperatures, humidity, and temperature cycling for reliable durability and performance validation across electronics, automotive, new energy, aerospace, and research applications.
High & Low Temperature Series
Double-layer Battery High & Low Temperature Explosion-proof Chamber
Dual Independent Chambers
Two stacked chambers, independently controlled
Explosion-proof Design
Window · pressure relief · door chains
Wide Temperature Range
-70°C to +180°C
Custom Configuration
Tailored size and configuration
Two independent chambers stacked vertically, with a whole-machine explosion-proof design. Suited to quality and reliability testing of power batteries, electronic and mechanical products and components under high temperature, low temperature and temperature-change conditions; the two chambers can run together or separately for higher throughput and safer operation.
Core Technical Parameters
Technical Parameters
Temperature Range
-70°C to +180°C
Temperature Fluctuation
±0.5°C
Chamber Volume
408L / 1000L
Control System
7-inch touchscreen / KM-5166
Temperature Uniformity
≤2.0°C
Materials
SUS304 inner / cold-rolled steel outer
Standard & Optional Configuration
Explosion-proof Window
Anti-fog film · laminated vacuum glass
Cable Ports
φ100 mm × 2 (silicone plugs)
Shelves
2 layers
Refrigeration
Water-cooled
Custom Sizes
Built to customer requirements
Product Specifications
PRODUCT PARAMETER
| Model | 408 | 1000 | |
|---|---|---|---|
| Inner chamber dimensions (mm) | Width W | 800 | 1000 |
| Height H | 850 | 1000 | |
| Depth D | 600 | 1000 | |
| Outer dimensions (mm) | Width W | 1000 | 1200 |
| Height H | 1755 | 1860 | |
| Depth D | 1340 | 1725 | |
| Floor area (m²) | Approx. 1.34 | Approx. 2.07 | |
| Temperature range | -70°C to +180°C | ||
| Temperature fluctuation | ±0.5°C | ||
| Temperature uniformity | ≤2.0°C | ||
| Heating rate | -70°C to +100°C, approx. 3°C/min average (no load) | ||
| Cooling rate | +20°C to -70°C, approx. 1°C/min average (no load) | ||
| Inner chamber material | SUS304 stainless steel, fully welded liner | ||
| Outer cabinet material | Cold-rolled steel with electrostatic powder coating | ||
| Insulation | Rigid polyurethane foam, flame-retardant class B2 | ||
| Explosion-proof window | Multi-layer vacuum glass with anti-fog heating film and stainless-steel protective mesh, preventing glass from scattering in an explosion | ||
| Pressure relief port | The relief door opens automatically when internal pressure exceeds the set value, releasing pressure and protecting the chamber | ||
| Door safety chains | Two chains on each side of the door; the door opens slightly to release internal pressure quickly without flying open | ||
| Refrigeration system | Water-cooled | ||
| Controller | KOMEG 7-inch colour touchscreen controller (KM-5166 control system) | ||
| Safety protection | Over-temperature, compressor overload and overheat, high pressure, motor over-current, thermal relay, fan overload, fuse, dry-burn protection, water-shortage protection, alarm | ||
| Standard accessories | 1 window light, 4 castors with levelling feet, 2 × φ100 mm cable ports with silicone plugs, 2 shelf levels, 1 lighting set | ||
| Manufacturing & Testing Standards | JJF 1101-2019, GB/T 2424 series, GB/T 5170.1-2016, GB/T 5170.2-2017, GB/T 10589-2008, GB/T 10592-2008, GB/T 11158-2008 | ||
| Compliant Standards | QC/T 741-2015 Supercapacitors for vehicles, GB/Z 18333.2-2015 Zinc-air batteries for electric road vehicles | ||
Note: dimensions and appearance can be tailored to customer requirements. We reserve the right to modify technical parameters.
Selection Support & Consulting
We provide professional consulting for diverse industries and applications, combining test requirements and operating conditions to recommend scientifically selected and customized solutions for efficient, reliable testing systems.
Requirements Discussion
Understand test objectives, sample characteristics, operating conditions, and standards to define key requirements and constraints.
Solution Selection
Match suitable product solutions and configurations to the requirements, providing recommendations and a basis for selection.
Custom Design
Provide customized designs for special requirements, including structural optimization, functional extensions, and system integration.
Delivery Service
Professional production and quality control, rapid delivery, and installation, commissioning, training, and long-term technical support.