Temperature & Humidity Chambers
Environmental Reliability Testing
Simulates high and low temperatures, humidity, and temperature cycling for reliable durability and performance validation across electronics, automotive, new energy, aerospace, and research applications.
Wide Temperature Range
-70℃ to +180℃ · control accuracy ≤0.01℃
Stable Temperature Control
Fluctuation ±0.5℃ · uniformity ≤2.0℃
Energy-saving Airflow Design
Industry-leading simulation · lower energy use
Remote Monitoring Network
LAN / RS232 / 485 integration
Suitable for electrical, electronic, mechanical and other products, components and materials, performing high/low temperature (or temperature cycling) simulation for quality management and reliability testing. Complies with GB/T 2423.1, GB/T 2423.2, GJB 150.3, GJB 150.4 and GJB 360.8 (MIL-STD-202F).
Core Technical Parameters
Technical Parameters
Temperature Range
-70℃ to +180℃
Temperature Fluctuation
±0.5℃
Temperature Uniformity
≤2.0℃
Heating Rate
Approx. 3℃/min average (no load)
Cooling Rate
Approx. 1℃/min average (no load)
Inner Capacity
36L to 1000L
Controller
7-inch touchscreen / PID control
Power Supply
AC380V±10% / 50Hz, 3-phase + earth
Material
SUS304 inner / powder-coated steel outer
Optional Configurations
Viewing Window
Data Interface
USB / RS485 / LAN
Cooling Method
Air-cooled / water-cooled
Custom Sizes
Product Specifications
PRODUCT PARAMETER
| Model | KMT-36 | KMT-100 | KMT-150 | KMT-225 | KMT-408 | KMT-1000 | |
|---|---|---|---|---|---|---|---|
| Inner dimensions (mm) | Width W | 300 | 500 | 600 | 700 | 700 | 1000 |
| Height H | 400 | 500 | 600 | 700 | 750 | 1000 | |
| Depth D | 300 | 400 | 460 | 480 | 800 | 1000 | |
| Outer dimensions (mm) | Width W | 510 | 700 | 800 | 900 | 900 | 1200 |
| Height H | 885 | 1652 | 1715 | 1660 | 1710 | 1925 | |
| Depth D | 1125 | 1173 | 1230 | 1470 | 1790 | 1747 | |
| Floor area (m²) | Approx. 0.52 | Approx. 0.82 | Approx. 0.98 | Approx. 1.3 | Approx. 1.6 | Approx. 2.07 | |
| Temperature range | -70℃ to +180℃ | ||||||
| Temperature fluctuation | ±0.5℃ | ||||||
| Temperature uniformity | ≤2.0℃ | ||||||
| Heating rate | Approx. 3℃/min average (no load) | ||||||
| Cooling rate | Approx. 1℃/min average (no load) | ||||||
| Inner chamber material | SUS304 stainless steel plate, fully welded inner liner | ||||||
| Outer cabinet material | High-quality cold-rolled steel plate with electrostatic powder coating | ||||||
| Insulation material | Rigid polyurethane foam insulation, flame-retardant grade B1 | ||||||
| Refrigeration system | Air-cooled or water-cooled, selectable | ||||||
| Controller | KOMEG 7-inch colour touchscreen controller (KM-5166 control system) | ||||||
| Safety devices | Over-temperature protection, compressor overload and over-heat, high pressure, motor over-current, thermal relay, fan overload, fuse, dry-heat protector, water shortage protector, alarm | ||||||
| Standard accessories | Viewing light 1 pc, castors with levelling feet 4 pcs, φ100mm cable port 2 pcs (with silicone plugs), sample shelves 2 pcs, illumination lamp 1 pc, 5m power cord | ||||||
| Ambient temperature | +5℃ to +35℃ | ||||||
| Power consumption | Depends on the model | ||||||
| Power supply | AC 380V ±10% 50Hz, 3-phase 4-wire + earth | ||||||
*Note: the 36 model reaches a minimum of -40℃, other models -70℃; dimensions and appearance can be customized to customer requirements; specifications are subject to change without notice.
Selection Support & Consulting
We provide professional consulting for diverse industries and applications, combining test requirements and operating conditions to recommend scientifically selected and customized solutions for efficient, reliable testing systems.
Requirements Discussion
Understand test objectives, sample characteristics, operating conditions, and standards to define key requirements and constraints.
Solution Selection
Match suitable product solutions and configurations to the requirements, providing recommendations and a basis for selection.
Custom Design
Provide customized designs for special requirements, including structural optimization, functional extensions, and system integration.
Delivery Service
Professional production and quality control, rapid delivery, and installation, commissioning, training, and long-term technical support.