Skip to Content

Thermal Shock

Three-zone Thermal Shock Chamber

Three-zone Thermal Shock Chamber KTS3

Three Independent Zones

Separate high-temp, test and low-temp chambers

Wide Temperature Range

High-temp +60~+200℃, low-temp -80~-10℃

Fast Recovery

30 min exposure each, recovery within 5 min

Multi-standard

GB/T 2423, GJB 150A, GJB 360B

The three-zone thermal shock chamber tests the endurance of materials under continuous alternating extremely high and extremely low temperatures, revealing chemical changes or physical damage caused by thermal expansion and contraction in the shortest possible time. It is suitable for metals, plastics, rubber and electronic components, and can serve as a reference for product improvement.

Core Technical Parameters

Technical Parameters

High-temp Chamber

+60℃ ~ +200℃

Low-temp Chamber

-80℃ ~ -10℃

Test Chamber

-65℃ ~ +150℃

Inner Volume

64L ~ 1000L

Controller

7-inch color touch screen / KOMEG KM-5188

Power Supply

AC380V±10%, 50Hz, 3-phase 4-wire + ground

Material

SUS304 inner / cold-rolled steel outer

Standard Configuration & Protection

Standard Accessories

Sample rack ×2, cable port (φ100mm) ×1

Safety Protection

No-fuse breaker, compressor over-pressure/over-heat/over-current, over-temperature, fan overload, fuse, dry-heat, water-shortage protection

Custom Sizes

Dimensions and appearance customized on request

Manufacturing & Testing Standards

JJF 1101-2019; GB/T 2424; GB/T 5170.1-2016; GB/T 5170.2-2017; GB/T 10589-2008; GB/T 10592-2008; GB/T 11158-2008

Compliant Standards

GB/T 2423-2012 (Tests A/B/Cab/Db/Z-AD/Cy); GJB 360B 103/106; GJB 150A.3/4/9

Product Specifications

PRODUCT PARAMETER

Model64A/B/D100A/B/D150A/B/D200A/B/D300A/B/D500A/B/D1000A/B/D
Inner dimensions (mm)Width W40050060065085010001000
Height H4004505004606007501000
Depth D4004505006706507001000
Floor area (m²)approx. 2.7approx. 3.5approx. 3.1approx. 3.5approx. 3.8approx. 4.1approx. 5.04
Temperature rangeHigh-temp chamber+60℃ ~ +200℃
Pre-heating time+60℃ ~ +200℃, within 30 min
Low-temp chamber-80℃ ~ -10℃
Pre-cooling time+20℃ ~ -80℃, within 70 min
Test chamber-65℃ ~ +150℃
Recovery time30 min high-temp exposure + 30 min low-temp exposure, recovery within 5 min
Inner materialSUS304 stainless steel, fully welded inner liner
Outer materialCold-rolled steel with electrostatic powder coating
InsulationRigid polyurethane foam, flame retardant class B1
Refrigeration systemCascade type, semi-hermetic compressor, eco-friendly refrigerant (HFC-R404A / HFC-R23)
ControllerKOMEG 7-inch color touch-screen controller (KM-5188)
Safety protectionNo-fuse breaker, compressor over-pressure/over-heat/over-current, over-temperature, fan overload, fuse, dry-heat, water-shortage protection
Standard accessoriesSample rack ×2, cable port (φ100mm) ×1
Power supplyAC380±10% 50Hz, 3-phase 4-wire + ground

Dimensions and appearance can be customized on request. Specifications are subject to change without notice.

Selection Support & Consulting

Choosing a three-zone thermal shock chamber depends on matching the temperature range, inner volume and load heat dissipation. We combine test standards, sample materials and loading conditions to advise on temperature grades, chamber size and configuration.

选型支持咨询流程

Requirements Discussion

Understand test objectives, sample characteristics, operating conditions, and standards to define key requirements and constraints.

Solution Selection

Match suitable product solutions and configurations to the requirements, providing recommendations and a basis for selection.

Custom Design

Provide customized designs for special requirements, including structural optimization, functional extensions, and system integration.

Delivery Service

Professional production and quality control, rapid delivery, and installation, commissioning, training, and long-term technical support.

Get Your Dedicated Test Solution

Contact our team with your sample size, test temperature range and load requirements, and we will tailor a suitable configuration and test plan for you.