Rapid Temperature Change & ESS Series
Environmental Reliability Testing
Delivers rapid temperature changes and cycling for stress screening and reliability validation in electronics, automotive, aerospace, and defense applications.
Fast Ramp
Variable speed · imported unit
Reliable Operation
Key parts from top brands
Easy Operation
7-inch screen · auto defrost
Custom Built
Made to order · tested on site
Suitable for cold-resistance tests and for temperature-change or gradual-ramp adaptation tests on complete electrical and electronic products and components; especially suited to environmental stress screening (ESS) of electronic and electrical products.
Core Technical Parameters
Technical Parameters
Temperature Range
-70°C ~ +180°C
Temperature Fluctuation
±0.5°C
Temperature Uniformity
≤2.0°C
Temperature Deviation
≤±2.0°C
Ramp Rate
5 / 10 / 15°C/min optional (-40°C ⇄ +85°C, no load)
Chamber Volume
225L ~ 1000L
Control System
7-inch color touchscreen · KOMEG KM-5166
Power Supply
AC380V ±10% 50Hz, 3-phase 4-wire + earth
Construction
SUS304 inner chamber / powder-coated cold-rolled steel cabinet
Optional Configurations
Cooling Method
Air-cooled / water-cooled
Refrigeration System
Semi-hermetic / hermetic compressor
Communication & Recording
Ethernet · data recorder
Test Ports
Custom test ports
Sample Racks
Custom sample racks
Baffles
Additional baffles
Custom Dimensions
Custom chamber sizes
Product Specifications
PRODUCT PARAMETER
| Model | KST-225S | KST-504S | KST-720S | KST-1000S | |
|---|---|---|---|---|---|
| Inner chamber dimensions (mm) | Width W | 700 | 800 | 900 | 1000 |
| Height H | 700 | 900 | 1000 | 1000 | |
| Depth D | 480 | 700 | 800 | 1000 | |
| Outer dimensions (mm) | Width W | 900 | 1000 | 1100 | 1200 |
| Height H | 1773 | 1973 | 2073 | 2103 | |
| Depth D | 1910 | 2070 | 2250 | 2300 | |
| Floor area (m²) | Approx. 1.7 | Approx. 2.1 | Approx. 2.5 | Approx. 2.8 | |
| Temperature range | -70°C ~ +180°C | ||||
| Temperature fluctuation | ±0.5°C | ||||
| Temperature uniformity | ≤2.0°C | ||||
| Temperature deviation | ≤±2.0°C | ||||
| Heating rate | Linear 5 / 10 / 15°C/min optional (-40°C~+85°C, no load) | ||||
| Cooling rate | Linear 5 / 10 / 15°C/min optional (+85°C~-40°C, no load) | ||||
| Inner chamber material | SUS304 stainless steel plate, fully welded inner liner | ||||
| Outer cabinet material | High-quality cold-rolled steel plate with electrostatic powder coating | ||||
| Insulation material | Rigid polyurethane foam insulation, flame-retardant grade B1 | ||||
| Refrigeration system | Air-cooled / water-cooled options; semi-hermetic or hermetic compressor | ||||
| Heater | High-quality nickel-chromium alloy heater | ||||
| Circulation fan | Centrifugal fan | ||||
| Observation window | Heated-film double glazing | ||||
| Controller | KOMEG 7-inch color touchscreen intelligent controller (KM-5166) | ||||
| Safety devices | Over-temperature, compressor over-pressure / cut-out / overload, fan overload, oil pressure, water shortage and earth leakage protection | ||||
| Standard accessories | Observation window, cable port (φ100mm, 1 pc on left side), baffles, baffle racks (2 sets), chamber light | ||||
| Optional accessories | Ethernet, recorder, special test ports, special sample racks, additional baffles | ||||
| Power supply | AC380V ±10% 50Hz, 3-phase 4-wire + earth | ||||
Note: outer dimensions and floor area above are for the linear-ramp version; the non-linear version differs slightly (225S: 900×1750×1710mm, approx. 1.5m²; 504S: 1000×1910×2150mm, approx. 2.15m²; 720S: 1100×2000×2250mm, approx. 2.5m²; 1000S: 1200×2070×2630mm, approx. 3.16m²), and its ramp rates are average values over the full range (no load). Manufacturing and testing reference standards: JJF 1101-2019 (calibration), GB/T 2424 (test guidance), GB/T 5170.1-2016 (general), GB/T 5170.2-2017 (temperature), GB/T 10589-2008 (low temperature), GB/T 10592-2008 (high & low temperature), GB/T 11158-2008 (high temperature). Dimensions and appearance can be tailored to customer requirements; we reserve the right to modify technical parameters.
Selection Support & Consulting
For rapid temperature change and ESS requirements, we advise on chamber size, ramp-rate class and refrigeration type based on sample heat load, target ramp rate and applicable test standards, and provide customized solutions.
Requirements Discussion
Understand test objectives, sample characteristics, operating conditions, and standards to define key requirements and constraints.
Solution Selection
Match suitable product solutions and configurations to the requirements, providing recommendations and a basis for selection.
Custom Design
Provide customized designs for special requirements, including structural optimization, functional extensions, and system integration.
Delivery Service
Professional production and quality control, rapid delivery, and installation, commissioning, training, and long-term technical support.