Skip to Content

Thermal Shock Chamber Series

Liquid Bath Thermal Shock Chamber

Liquid Bath Thermal Shock Chamber TSTL-15B

Rapid Liquid-Bath Heat Transfer

Circulating medium heat transfer

Automatic Two-Bath Transfer

≤5 s basket travel · ≤10 s transfer

Stable Temperature Control

±0.5℃ fluctuation · ≤2.0℃ uniformity

Adaptable Media

Silicone oil / fluorocarbon oil / D02TS / glycol

The chamber uses circulation pumps to circulate liquid media at different temperatures through the test chamber for rapid heating and cooling; the automatic lift design moves the basket from the hot bath to the cold bath (or the reverse) within ≤5 seconds. It is used for cold, low-temperature and high/low-temperature tests on electrical, electronic and mechanical products, components and materials, evaluating their ability to withstand abrupt temperature changes: a single shock or repeated shocks, and the effects of rapid thermal change.

Core Technical Parameters

Technical Parameters

Hot Bath Temperature Range

+60℃~+125℃

Cold Bath Temperature Range

-55℃~-10℃

Temperature Fluctuation

≤±0.5℃

Temperature Uniformity

≤±2.0℃

Temperature Deviation

≤±2.0℃

Basket Dimensions

300×200×250 mm (approx. 15 L)

Transfer Time

≤10 s

Shock Transition Time

+125℃ ~ -55℃, ≤5 min

Control System

7-inch color touchscreen / KM-5166 controller

Optional Configurations

Liquid Medium

Silicone oil / D02 fluorocarbon oil / D02TS / water-glycol

Ethernet

Remote monitoring and data upload

Recorder

Temperature curve recording and export

Special Test Ports

Customized for sample wiring

Extra Baffles & Racks

Customized to sample shape

Product Specifications

PRODUCT PARAMETER

ModelTSTL-15B
Basket dimensions (mm)W 300 × H 200 × D 250
Outer dimensions (mm)W 1400 × H 2000 × D 1450
Floor area (m²)Approx. 2.03
Temperature rangeHot zone +60℃~+125℃; cold zone -55℃~-10℃
Temperature fluctuation≤±0.5℃
Temperature uniformity≤±2.0℃
Temperature deviation≤±2.0℃
Transfer time≤10 s
Shock transition time+125℃ ~ -55℃, ≤5 min
Liquid medium · Silicone oilHot bath RT+40℃~+260℃; cold bath +20℃~+25℃
Liquid medium · D02 fluorocarbon oilHot bath +70℃~+200℃; cold bath -65℃~0℃
Liquid medium · D02TSFor extreme temperature, high pressure, aggressive media or high cleanliness, e.g. semiconductor manufacturing and spacecraft components
Liquid medium · Purified water / glycolGlycol: hot bath +60℃~+160℃; cold bath -10℃~+80℃; for tests with lower medium requirements and tighter cost control
Outer cabinet materialHigh-quality cold-rolled steel with electrostatic powder coating
Insulation materialRigid polyurethane foam insulation, flame-retardant grade B1
Refrigeration systemWater-cooled; semi-hermetic compressor
HeaterHigh-quality nickel-chromium alloy heater
BlowerCentrifugal fan
Observation windowHeated-film laminated glass
ControllerKOMEG 7-inch color touchscreen controller (OS: KOMEG KM-5166 cold-output version)
Protection devicesOver-temperature, compressor over-pressure, circuit-breaker and overload, fan overload, oil-pressure, water-shortage and earth-leakage protection
Standard accessoriesObservation window, cable port φ100 mm (1, left side), baffles, 2 baffle racks, internal light
Optional accessoriesEthernet, recorder, special test ports, special specimen racks, additional baffles
Power supplyAC380V±10% 50Hz, 3-phase 4-wire + earth

*Note: dimensions and appearance can be customized to customer requirements; specifications are subject to change without notice.

Selection Support & Consulting

Selection of a liquid-bath thermal shock chamber depends on matching the medium, temperature range and sample size. We advise on medium selection, basket dimensions and chamber configuration based on your test standards, sample material and load conditions.

选型支持咨询流程

Requirements Discussion

Understand test objectives, sample characteristics, operating conditions, and standards to define key requirements and constraints.

Solution Selection

Match suitable product solutions and configurations to the requirements, providing recommendations and a basis for selection.

Custom Design

Provide customized designs for special requirements, including structural optimization, functional extensions, and system integration.

Delivery Service

Professional production and quality control, rapid delivery, and installation, commissioning, training, and long-term technical support.

Get Your Dedicated Test Solution

Contact our team with your sample size, test temperature range and medium requirements, and we will tailor the chamber configuration and test solution to your application.