Skip to Content

Thermal Shock

Two-zone Thermal Shock Chamber

Two-zone thermal shock chamber

Independent hot & cold zones

Separate temperature control and interlocked doors

Fast basket transfer

30 min exposure each, recovery ≤5 min

Safety interlock

Fan and basket drive cut off when the door opens

Custom dimensions

Fully welded liner, size and appearance customizable

The two-zone thermal shock chamber evaluates how materials and composite structures withstand rapid alternation between high and extremely low temperatures, revealing chemical changes or physical damage caused by thermal expansion and contraction within the shortest time. It is suitable for metals, plastics, rubber, electronic components and similar materials, and provides a basis for product improvement and reliability assessment.

Core Technical Parameters

Technical Parameters

Test zone temperature range

A: -40°C ~ +150°C; B: -55°C ~ +150°C; D: -65°C ~ +150°C

High-temperature zone

+60°C ~ +200°C

Low-temperature zone

A: -55°C ~ -10°C; B: -70°C ~ -10°C; D: -80°C ~ -10°C

Pre-heating time

Within 30 min (+60°C ~ +200°C)

Pre-cooling time

Within 70 min (+20°C ~ -55 / -70 / -80°C)

Recovery time

Within 5 min (30 min exposure each)

Basket volume

64 L ~ 500 L

Controller

7-inch color touch screen (KM-5188)

Power supply

AC380V ±10% 50Hz, 3-phase 4-wire + earth

Configuration & Standards

Refrigeration system

Cascade, semi-hermetic compressor, HFC-R404A/HFC-23

Liner & insulation

Fully welded SUS304 liner, PU insulation grade B1

Standard accessories

2 sample shelves, 1 cable port φ100 mm

Protection devices

Over-temperature, compressor over-pressure/over-heat/over-current, fan overload, dry-heat, water shortage

Standards

GB/T 2423.1-2008, GB/T 2423.2-2008, GJB 150.3-2019, GJB 150.4-2019, GJB 150.5-2019

Product Specifications

PRODUCT PARAMETER

ModelKTS2-64KTS2-100KTS2-150KTS2-200KTS2-300KTS2-500
Basket dimensions (mm)Width W5006507109709701000
Height H350350400400460500
Depth D3704505305506801000
Floor area (m²)Approx. 1.72Approx. 2.08Approx. 2.3Approx. 2.95Approx. 3.73Approx. 4.1
Temperature configurationA / B / D type (three temperature configurations selectable per size)
High-temperature zone+60°C ~ +200°C
Pre-heating time+60°C ~ +200°C, within 30 min
Low-temperature zoneA: -55°C ~ -10°C; B: -70°C ~ -10°C; D: -80°C ~ -10°C
Pre-cooling timeA: +20°C ~ -55°C, within 70 min; B: +20°C ~ -70°C; D: +20°C ~ -80°C
Test zone temperature rangeA: -40°C ~ +150°C; B: -55°C ~ +150°C; D: -65°C ~ +150°C
Temperature recovery time30 min exposure at high and low temperature respectively, recovery within 5 min
Inner chamber materialSUS304 stainless steel plate, fully welded inner liner
Outer cabinet materialHigh-quality cold-rolled steel plate with electrostatic powder coating
Insulation materialRigid polyurethane foam insulation, flame-retardant grade B1
Refrigeration systemCascade system, semi-hermetic compressor, HFC-R404A/HFC-23 refrigerant
ControllerKOMEG 7-inch color touch screen controller (KM-5188 thermal shock system)
Protection devicesNo-fuse breaker, compressor over-pressure / over-heat / over-current protection, over-temperature protection, fan overload protection, fuse, dry-heat protector, water shortage protection
Standard accessoriesSample shelves ×2, cable port (φ100 mm) ×1
Power supplyAC380V ±10% 50Hz, 3-phase 4-wire + earth
StandardsGB/T 2423.1-2008, GB/T 2423.2-2008, GJB 150.3-2019, GJB 150.4-2019, GJB 150.5-2019

Note: A / B / D temperature configurations are available for each size. Dimensions and parameters above are nominal; actual dimensions and appearance can be customized. We reserve the right to modify technical parameters.

Selection Support & Consulting

Selection support for thermal shock testing: based on sample size and load, temperature configuration and recovery-time requirements, applicable standards and site conditions, we recommend the chamber type, basket size and refrigeration configuration.

选型支持咨询流程

Requirements Discussion

Understand test objectives, sample characteristics, operating conditions, and standards to define key requirements and constraints.

Solution Selection

Match suitable product solutions and configurations to the requirements, providing recommendations and a basis for selection.

Custom Design

Provide customized designs for special requirements, including structural optimization, functional extensions, and system integration.

Delivery Service

Professional production and quality control, rapid delivery, and installation, commissioning, training, and long-term technical support.

Get Your Dedicated Test Solution

Contact our professional team with your sample size, test temperature range and recovery-time requirements; we will tailor the equipment configuration and test solution for you.